Chimney Construction & Repair — Kingsport, Johnson City & Bristol, TN
A chimney is one of the hardest-working structural elements on your property. It handles extreme heat, constant moisture exposure, freeze-thaw cycles, and years of creosote buildup — and when something goes wrong, the consequences range from smoke damage to chimney fires. At Hudson Stoneworks & Masonry, we build and repair chimneys throughout the Tri-Cities region of Northeast Tennessee and Southwest Virginia, delivering craftsmanship that meets code and stands for decades.
Chimney Services We Provide
Whether you need a new chimney built from the ground up or an existing one repaired and restored, our experienced masons have you covered:
- New chimney construction — brick, stone, and block chimneys for fireplaces, wood stoves, furnaces, and boilers
- Chimney rebuilding — full or partial tear-down and rebuild when damage is too extensive to repair
- Tuckpointing and repointing — grinding out deteriorated mortar joints and packing them with fresh mortar to stop water infiltration
- Chimney crown repair and replacement — the crown is the concrete cap at the top of the chimney and is one of the first things to crack and fail
- Flashing repair — the metal seal where the chimney meets the roof is a common source of leaks; we replace or re-seal it properly
- Spalling brick and stone repair — freeze-thaw damage causes brick faces to pop off; we match and replace affected units
- Chimney cap installation — stainless steel caps keep rain, animals, and debris out of your flue
Why Masonry Chimneys Fail in Northeast Tennessee
The Tri-Cities climate is hard on masonry. Winters here cycle above and below freezing repeatedly, and that freeze-thaw action works water into tiny cracks in mortar and brick, expanding them season after season until the damage becomes visible and costly. Most chimney failures we see in Kingsport, Johnson City, and Bristol start with neglected mortar joints — a repointing job that costs a few hundred dollars ignored for years until it becomes a full rebuild. If you’ve noticed white staining on the brick (efflorescence), crumbling mortar, or water in your firebox, don’t wait.
We serve homeowners and contractors across Sullivan County, Washington County, Bristol, Blountville, Church Hill, Rogersville, Bluff City, Gray, Mount Carmel, Duffield VA, and Gate City VA.
Frequently Asked Questions
How do I know if my chimney needs to be repointed or fully rebuilt?
If mortar joints are crumbling, recessed more than ¼ inch, or missing in spots, repointing (tuckpointing) is usually sufficient. If the brick itself is cracking, spalling, or if the chimney is leaning or has major structural cracks, a partial or full rebuild is likely needed. A hands-on inspection will tell you which situation you’re dealing with — call us for a free look.
How long does chimney repointing last?
Quality repointing done with the right mortar mix for your existing brick type should last 20 to 30 years. Using the wrong mortar hardness is one of the most common mistakes — mortar that is too hard for older soft brick will cause the brick faces to spall rather than letting the mortar joint be the sacrificial element as intended.
Do you build chimneys for wood stoves and inserts, or only traditional fireplaces?
We build and repair chimneys for all fuel types — wood-burning fireplaces, wood stoves, pellet stoves, gas appliances, oil furnaces, and boilers. Each application has specific flue sizing, height, and liner requirements that we build to from the start.
Get a Free Chimney Estimate in the Tri-Cities
Hudson Stoneworks & Masonry serves Kingsport, Johnson City, Bristol, and communities throughout Northeast Tennessee and Southwest Virginia. Call (423) 502-1968 or submit a request online for your free, no-obligation estimate.
